!
14
DETAIL ON HOW TO PLACE THE
SAFETY CLIP LOCK THE FRAME.
Support Bar
The Support Bar has 3 (three) height
settings, which can be adjusted
according to the size of the person
or the type of exercise. To adjust,
just fasten in the direction indicated
in the figure, until the pins are
released from the metallic structure,
position the bar at the new desired
height and secure the Grab Bar with
the Safety Clip.
Make sure the Reformer hook block
supports are in the lowest position so
as not to prevent the bar from
moving. When not in use, the Support
Bar must be removed from the Tower
to facilitate and not hinder the use of
other accessories. When using the
Support Bar, the safety strap must
always be used. Make sure the
carabiner is fully closed and in good
condition.
BE CAREFUL WITH THE SUPPORT BAR, AS IT IS ONE OF
THE MOVING PARTS OF THE EQUIPMENT THAT WILL
BE TENSIONED BY SPRINGS. IMPROPER USE MAY
CAUSE ACCIDENTS. USE THE SAFETY STRAP. A
TRAINED PROFESSIONAL MUST KEEP ONE HAND ON
THE BAR AT ALL TIMES TO PREVENT ACCIDENTS.
!
