background image

Tires

Inspect tires before each ride, this should 

include the following:
1. Inspect for cracks or leaks

2. Inspect tread depth.  If tread depth is 

below 4mm (.16 in.) replace the tire.

3. Check tire pressure.  Incorrect tire 

pressure can affect the handling, rider 

comfort, steering, tire life and traction.  

Always check the tire pressure before each 

ride.   

Tire size:

Front tires:    AT19x7-8

Rear Tires:    AT19x7-8

!

Operating this Mini Bike with 

improper tire sizes or pressure 

could be hazardous
Operating this Mini Bike with 

improper tire sizes or pressure 

could result in loss of control of the 

Mini Bike which could result in an 

accident.
Never operate this Mini Bike with 

improper tire sizes or pressure.

WARNING

!

Operating this Mini Bike with worn 

tires could be hazardous
Operating this Mini Bike with worn 

tires  will reduce traction which 

could result in an accident.
Never operate this Mini Bike with 

tires that have a tread depth of less 

than 4mm (0.16 in.)

WARNING

Minimum tread

4mm (.16 in.)

Tire pressure

Front tires:  10psi  (69 kpa)

Rear tires:  10psi  (69 kpa)

Replacing tires

Always replace tires with type and size 

listed in this manual.  

 

Always use the correct tools when 

replacing tires.   The bead and sometimes 

the rim can be damaged by using  the 

wrong type of tools.   It is usually best 

to have tires replaced by an authorized 

service center.  Service centers have the 

correct equipment and expertise to change 

tires without causing damage.

Punctures to tires can usually be repaired 

by using plug type patches.   Plug type 

patches cannot repair tires that have been 

cut.     If the tire has been cut or has a 

puncture in a location or size that cannot 

be repaired,   replace the tire.   

Be prepared for flat tires,  always carry a 

plug type patch kit and air pump with you.    

MAINTENANCE

25

Содержание Mini Metal









































Отзывы: