Page of 6
4
DESCRIPTION
The METAL MAN TTWC1 Three-Tier Welding Cart is designed to hold portable wire welders,
plasma cutters and TIG Welders. This cart features a three level design to help organize all your
welding tools and accessories. It also has a set of cable wraps on each side for easy and safe
storage of your welding cables. This unit also has an on-board cylinder rack to secure gas cylinders
up to 7 inches in diameter. The 6 inch solid rubber back wheels and the 2 inch solid rubber casters
help maneuver this cart. Your welder or cutter sits on the top shelf, slanted to help get a better view
of the unit controls.
ASSEMBLY
1. Remove all items from the packing material.
2. Starting with the bottom panel, place the bottom panel on a sturdy surface with the side lips
facing up. Find the long slots at the back of the base unit. Insert the Axle Clips into the slots
from the top, then slide the axle through the large hole in the clip. Repeat for both clips.
3. Slide a wheel on each side of the axle.
4. Secure each wheel with a flat washer and cotter pin.
5. Locate the 4 pre-drilled holes at the left front of the bottom panel. Slide a hex bolt through
one pre-drilled hole and then into the matching pre-drilled hole in the flange of one of the
casters. Then secure with a hex nut. Repeat for the other 3 mounting holes.
Top
Shelf
Vertical
Supports
Bottom
Shelf
2 Inch
Caster
6 Inch
Wheel
Gas Cylinder
Support
Middle
Shelf
