Page of 14
9
Align short table leg extension
with the other set of pivot clips.
Install the hardware through the
hole in the pivot clip and the
hole through the leg.
Hand-tighten only, tighten only
after table assembly is
complete.
Hex head bolt M6x45MM
Thick Flat Washer 6
Lock Washer 6
Hex Head Lock Nut M6
Repeat for both sides.
Flip the attached longer table
legs over so the feet are
pointing up. Then lay in place
the short table leg under the
short table leg extension
assembly to align mounting
holes. Make certain the ends of
the short table legs are pointing
down.
