Page of 14
8
ASSEMBLY
Place the table work surface
upside down on a stable
surface.
Take the longer of the two table
legs and place on top of the
table work surface to align with
the wider set of pivot clips on
the table work surface. Table leg
ends should be pointing down.
Install the hardware through the
hole in the pivot clip and the
hole through the leg.
Hand-tighten only, tighten only
after table assembly is
complete.
Hex head bolt M6x45MM
Thick Flat Washer 6
Lock Washer 6
Hex Head Lock Nut M6
Repeat for both sides.
