Metal Defender MD-6A, Руководство пользователя

Страница: 10 / 19

10
5. Connect the commutation cables from each leg to the corresponding spot on the
motherboard. Next connect the white led strip from each leg to the corresponding spot on the
motherboard. Once both of the connectors are secured and fastened in place connect the
master power plug to whichever leg you would prefer the power cord to be running from.
6. Now the unit should be fully assembled & preprogrammed by us ready to go. With one
person on each side of the unit, carefully pick it up and stand it upright.
7. Your power cord can be plugged into either leg but the master power plug located in the
head module must be connected to the same leg.
(Never plug two metal detectors into the same set of outlets. Each unit must operate on its
own circuit.)
8. Make sure your unit is at least 3-4 feet away from any metal doors, over ductwork or other
metal objects