Metal Defender MD-6, Руководство пользователя, Страница: 8 / 21

8
Installation Instructions
Please read through the following instructions to properly install, program, and adjust the
sensitivity of the Metal Defender walk-through metal detector.
1. Open the boxes and take out the 3 main pieces – Left probe, Right probe, and main
board. Place all on the Styrofoam in the position below to properly secure the 3 pieces
to form the frame of the unit (see diagram below). The LED display on the main board
should be in the upright position facing you. Each probe is identified with an “L” or “R”.
Make sure the “L” or “R” inside the main board matches the corresponding probe.
2. Take the 8 bolts and nuts in the bag and make sure that they are pushed through each
screw hole on the probes and than through the holes in the main board.
3. Using the keys provided with your detector, open the main board using the key hole
slot to access the main board.