Metal Defender MD-6 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 21

Metal Defender MD-6 Скачать руководство пользователя страница 16

16

I set up my unit, but it will not sound when I walk through with metal?

Always remember that the control panel with the buttons and LED should always be facing

away from the people walking through. Continue with the flowchart and make sure that your
alarm time length is not set at y-00. If set at y-00, the unit is on mute mode and will not give
an audio alarm when metal is detected. Secondly, please make sure that the internal AC plug
is plugged into the panel where the internal power source is plugged in. Also, please make
sure that the correct serial ports inside the head unit are securely fastened in the proper
locations.

There seems to be a lot of alarm detections occurring, more than we want or expected. Why

is this?

Before implementing a metal detector into your security, one must have a plan as to how the

equipment is going to best work for them. The best way is to consult who is going to be
monitoring the unit and what is the purpose of the unit. For example, if you are looking to
catch people stealing small computer IC chips in their pockets, you are going to need a high
sensitivity to detect them. One must have a plan as to which items are needed to be put aside
before walking through. If you are not sure, or would like a product specialist to assist creating
a plan, feel free to contact us at (815) 467-6464.

The passerby units are not adjusting or are continuously increasing. What should I do?

The black circular discs on the inside of the panels are the infrared sensors. These pick up

when a person walks through the unit. If the unit is not picking up the passerbys, the sensors
may have fingerprints or dirt on them. With a cloth towel with rubbing alcohol or window
cleaner, rub around the sensor to clean. Also, please check and make sure that the cables are
securely fastened to the metal detector leg panels and PC board. If this connection is loose,
the unit may not work.

«
...
14
15
16
17
18
...
»

Содержание MD-6






















Отзывы:

Нет отзывов