Metacon-Next RGS EI-30, Руководство пользователя

Страница: 3 / 29

Metacon-Next B.V. RGS EI(1) 30 - EI(2) 60 - EW 240 12-07-2022
User Manual art no: 89072 Rev: 1
3
1 Preface
Before using the door, please observe the safety instructions in this document and the
instructions for use.
Metacon-Next only supplies products to the "specialist retailers". This means that Metacon-
Next only delivers a door. The installation, service and maintenance by and under the
responsibility of the "specialist retailer" is taken care of.
Metacon-Next only supplies CE marked doors in accordance with EN 13241 and/or EN
16034.
If assembly and installation of the fire resistant door is done by third parties and changes are
made to the door by the installation company, this shall be done with material supplied by
Metacon-Next, registered under the serial number of the door.
When the installation company makes this modification in accordance with the current
European legislation, it is obliged to mark the installation CE itself.
It is the responsibility of the installation company to install the door in accordance with the
operating instructions. The operating instructions should remain with the door at all times.
Type marking with the serial number is attached at the following location: On the drive side
on the guide, approximately 1600mm from the bottom. This sticker must not be removed or
covered, this information is required for the supply of repair and/or maintenance items,
among other things.
Metacon-Next shall not be liable for unsafe conditions, accidents, damages and injuries
resulting from, for example:

Disregarding warnings and/or regulations as displayed on the fire resistant
door and/or in the owner's manual;

Insufficient and/or improper maintenance, Metacon-Next sets a minimum
frequency of once a year maintenance as necessary;

Modifications to the door and accessories by third parties. This also includes
the use of other than prescribed replacement parts (e.g. a battery), incorrect
connection or setting, modification of the control unit and control program.

Improper installation or assembly of the product.

Local (country specific) additional regulations.