1
Wicked3D eyeSCREAM QuickStart Guide
We all know that you purchased this Wicked3D eyeSCREAM system to enhance your 3D gaming
experience. You want to play games, not read a long and boring manual! Well, if you don’t read anything
else, please take some time to read through this QuickStart Guide. Follow the 6 easy sections to properly
install and configure your eyeSCREAM system. If you do, you’ll quickly learn to make the most of your
Wicked3D eyeSCREAM system and your games will never look better.
Sections:
1. Installing eyeSCREAM hardware
2. Installing eyeSCREAM software/drivers
3. Understanding eyeSCREAM
4. eyeSCREAM test
5. Configuring eyeSCREAM for Direct3D Games
6.
Configuring eyeSCREAM for Glide Games
Section 1: Installing the eyeSCREAM hardware:
Note: These instructions assume that a Wicked3D or other eyeSCREAM-compatible Voodoo2 3D
accelerator card is properly installed in your system. If your 3D accelerator hardware is not yet
installed, please follow its manufacturer’s instructions to install the 3D accelerator hardware prior to
installing eyeSCREAM.
1. As a precaution to protect your PC and the eyeSCREAM hardware, shut down your system and turn off
the power to your computer before beginning installation.
Note: To avoid the chance of electric shock to you and damage to your computer and
components, we strongly recommend disconnecting the power supply cord from your
computer during the installation process.
2.
Locate the VGA cable that leads from your monitor to your PC. Disconnect the end of the cable that
attaches to your PC.
3.
Attach the narrow end of the eyeSCREAM Adapter to the same VGA port that your monitor cable was
previously attached to. Secure the eyeSCREAM Adapter to your PC by fastening the screws on the
eyeSCREAM Adapter.
