Metabo KS 66 -, Руководство по эксплуатации

Страница: 16 / 108

16
ENGLISH ENG
operation, this indicates an overload. Relieve the
machine of the load.
8.3 Working directions
Lay out the mains cable so that the saw cut can be
executed without hindrance.
KS 66, KSE 68 Plus: To do this the mains cable can
be held by the cable guide (3).
The arrow (20) on the guide plate is an aid for
applying the saw to the workpiece and during
sawing. At maximum cut depth it marks roughly
the outer diameter of the saw disc, i.e. the cutting
edge.
Do not turn the machine on or off while the
saw disc is touching the workpiece.
Let the saw blade reach its full speed before
making a cut.
When the hand-held circular saw is added, the
movable safety guard is swung backwards by the
workpiece.
KSE 68 Plus: To facilitate application to the
workpiece, the movable safety guard can be
swivelled back manually with the lever (10).
While sawing, do not take the machine out of
the material if the saw disc is still rotating.
Instead, let the saw disc come to a standstill first.
If the saw disc blocks, turn the machine off
immediately.
How to saw following a straight marking: this is
what the cut indicator (7) is for. The width of the
cut indicator represents roughly the width of the
saw disc.
The cut indicator (7) is adjustable. To do so, make
a trial cut. Undo the locking screw on the cut
indicator. Set the cut indicator to suit the saw cut.
Retighten the locking screw.
How to saw following a small rail attached to
the workpiece:
In order to achieve an exact
cutting edge, you can attach a rail to the workpiece
and then guide the hand-held circular saw by
means of the guide plate (4) along this rail.
Sawing with a parallel guide:
For cuts parallel to a straight edge.
KS 66, KS Partner Edition: The parallel stop (9) can
be inserted from the right into its holding fixture.
Read off the cut width on the right of the cut
indicator (7). Tighten the locking screw (8). It is
best to calculate the exact cut width by making a
test cut.
KSE 68 Plus: The double-guided parallel stop (9)
can be inserted into its holding fixture from both
sides.
When inserting it, make sure that it is
parallel with the saw disc. Read the cut width
from the right or left of the cutting display (7).
Tighten the locking screws (8). It is best to
calculate the exact cut width by making a test cut.
8.4 Sawing with guide rail 6.31213
For straight and splinter-free cutting edges accu-
rate to the millimetre. The anti-slip coating keeps
the surface safe and protects the workpiece
against scratches. The machine can be placed
against the stops on the guide rail for plunge
cutting and cuts can be executed with a uniform
length.
Adapter parts 6.31020 must be attached prior to
use. See Accessories section.
Depending on the application type and cutting
width, the parallel stop (9) can be inserted from the
right or left into its holder.
Sawing very narrow sections:
Insert the parallel stop (9) from the right into its
holder.
Clean the machine regularly. This includes vacuum
cleaning the ventilation louvres on the motor.
Changing saw discs
Pull the plug out of the plug socket before
any adjustments or servicing are performed.
Press in the spindle locking button (18) and hold in
place. Turn the saw spindle slowly with the
spanner in the saw disc fixing screw (24) until the
lock catches.
Remove the saw disc locking screw (24) by turning
it in counter-clockwise direction.
Take off the outer saw disc flange (23). Pull back
the movable safety guard (26) and remove the saw
disc (22).
The contact areas between the inner saw disc
flange (21), the saw disc (22), the outer saw disc
flange (23) and the saw disc fixing screw (24) must
be clean.
For correct operation of the safety clutch,
the contact surface of the saw blade fixing
screw (24) that contacts the saw blade must be
coated with a thin film of grease. Regrease with
a multi-purpose grease (DIN 51825 - ME /
HC 3/4 K -30).
Insert a new saw disc, making sure the direction of
rotation is correct. The direction of rotation is
indicated by arrows on the saw disc and safety
guard.
9 Tips and Tricks
10 Maintenance
17026719_0708 KS 66_für Adapter.book Seite 16 Montag, 14. Juli 2008 1:01 13