Metabo ISA 18 LTX 24, Оригинальное руководство пользователя

Страница: 10 / 12

10
en ENGLISH
7.3 Operating mode selection
Press the lock (5) and turn the thumbwheel (6).
Hammer drilling
Chiselling
Setting chisel position
Turn the chisel in the desired position. Then
select "Chiselling" to secure the chisel and
prevent it from twisting.
Drilling
When a chisel is fitted, only operate the
machine in the chiselling operating mode .
Avoid levering with the machine when a chisel
is fitted.
7.4 Selection of direction of rotation
Only activate the rotation selector switch (7)
when the motor has completely stopped.
Select direction of rotation:
R = clockwise rotation (for drilling, hammer
drilling, chiselling, drive in screws)
L = anti-clockwise rotation (for the removal of
screws)
0 = Centre position: with the transporting safety
device engaged (switch-on lock)
7.5 Tool change with SDS chuck
Before fitting, clean tool shank and apply
special grease (accessories order no.
6.31800)! Use only SDS-Plus tools.
Inserting tools:
- Turn tool and insert until it engages. The tool is
automatically locked.
Remove the tool:
See page 2, fig. A.
- Pull tool lock (1) backwards in direction indicated by
arrow (a) and remove tool (b).
8. Maintenance and Cleaning
Vent slots:
The vent slots of the machine should be cleaned
periodically.
Remove the battery pack periodically and wipe
the contact area of the battery pack and machine
with a dry cloth and remove drilling dust.
9. Accessories
Only use original Metabo battery packs and
Metabo accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Fit accessories securely. If the machine is operated
in a holder: secure the machine well. Loss of
control can cause personal injury.
Chargers: ASC 145, etc.
Battery packs with different capacities. Buy
battery packs only with voltage suitable for your
power tool.
5.5 Ah (LiHD), order no.: 625368000
etc.
5.2 Ah (Li-Ion), order no.: 625028000
etc.
For a complete range of accessories, see
www.metabo.com or the catalogue.
10. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
11. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of power
tools in your household waste! According to
European Directive 2012/19/EU on Waste
from Electric and Electronic Equipment and
implementation in national law, used power tools
must be collected separately and recycled in an
environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
12. Technical Data
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical progress.
U = Voltage of battery pack
n
1
= no-load speed
n
2
= on-load speed
s
max
= max. impact rate
W = max. single impact force
D
1
= drill-Ø concrete with hammer drill bits
D
2
= drill-Ø masonry with core bits
D
3
= drill-Ø concrete with core bits
D
4
= drill-Ø steel
D
5
= drill-Ø soft wood
m = Weight with smallest battery pack
D = Collar diameter