Metabo HPT RH18DA Скачать руководство пользователя страница 4

  Failure to observe this may result in accidents or 

injury.

7.  There are cases in which highly toxic gas will be 

emitted if used on plastic, lacquer or similar materials.

 

Always ensure that the work area is fully ventilated, 

and wear a dust-protection mask.

8.  Apply heat gently while moving the Heat Gun up, 

down, left and right.

 

Aiming it constantly at a single location may result in 

the outbreak of smoke or 

fi

 re.

9.  Check the tool for damage, cracks or malformation in 

the event of it being accidently dropped or subject to 

impact.

  Damage, cracks and malformation may result in 

injury.

10. Cease operations immediately in the event of the 

tool not operating properly or if abnormal noises 

or vibrations are noticed, and contact metabo HPT 

Authorized Service Center to request inspections and 

repairs.

 

Continued use may result in injury.

11.  Do not get away from the unit while it is switched on.

 

Always return the switch to the OFF (

) position when 

you are 

fi

 nished working.

 

Failure to observe this may result in accidents.

Important safety Warning: 

The appliance for indoor use only

a)  Hidden areas such as behind walls, ceilings, 

fl

 oors, 

so

  t boards and other panels may contain 

fl

 ammable 

materials that could be ignited by the heat gun when 

working in these locations. The ignition of these 

materials may not be readily apparent and could 

result in property damage and injury to persons.

When working in these locations, keep the heat gun 

moving in a back-and-forth motion.

Lingering or pausing in one spot could ignite the panel or 

the material behind it.

b)  IMPORTANT SAFETY INSTRUCTIONS. 

READ THESE INSTRUCTIONS

Extra safety instruction of cordless heat gun

 •  Don't put hands on the air inlet or block the air 

ventilation in any way.

 •  During usage, nozzle and other accessory will be 

extremely high temperature, which can be touch 

after completely cool down.

 • Cut o

  the power source before put down the 

machine.

 •  Please avoid the machine in unattended status 

when the machine is running.

 •  Unintentional of cordless heat gun could lead to 

fi

 re risk.

 •  Please not to use cordless heat gun in humidity 

or easy 

fl

 ammable, explosive places.

 •  Storage the cordless heat gun when completely 

cool down.

e)  If battery damaged or doesn't follow usage 

instruction, which may generate poisonous 

steam. Working area must ensure the air 

ventilation, if any uncomfortable then go 

to hospital for medical treatment as the 

steam from the battery could stimulate the 

aspiratory tract.

f)  Recharge only with the charger speci

fi

 ed by 

the manufacturer. 

A charger that is suitable for 

one type of battery pack may create a risk of 

fi

 re 

when used with another battery pack.

g) Use power tools only with speci

fi

 cally 

designated battery packs. 

Use of any other 

battery packs may create a risk of injury, overload 

and 

fi

 re.

h)  With sharp edges or tips object as nails or 

screw driver could damage the battery, which 

may cause inner short circuit, 

fl

 ame, smoke, 

explode or extreme heat. 

i)  Do  not  incinerate  this  heat  gun  even  if  it  is 

severely damaged. The batteries can explode 

in a 

fi

 re.

6) Service

a)  Have  your  power  tool  serviced  by  a 

quali

fi

 ed repair person using only identical 

replacement parts.

  This will ensure that the safety of the power tool is 

maintained.

– WARNING –

 

To  reduce  the  risk  of  injury,  user  must  read 

instruction manual.

CORDLESS HEAT GUN SAFETY 

WARNINGS

WARNING

1.  Do not use the tool with wet hands.

 

Failure to observe this may result in electric shocks.

2.  Keep your hands and face away from the nozzle.

3.  Always check the work area prior to use, and do not 

use the tool if safety cannot be guaranteed.

  Failure to observe this may result in in

fl

 ammable 

articles concealed in or behind invisible areas (cases, 

ceilings, 

fl

 oors, hollow areas) being ignited.

4.  Do not use the tool in the vicinity of volatile substances 

(thinner, gasoline, etc.)

  Failure to observe this may result in the outbreak of 

fi

 re or explosions.

5.  When working in elevated locations, make sure there 

are no people or 

fl

 ammable materials underneath.

 

Failure to observe this may result in accidents.

6.  Do not point the hot air directly at people or animals. 

Do not look into the nozzle. Do no use it as a hair dryer 

under any circumstances.

4

English

00Book̲RH18DA̲metabo.indb   4

00Book̲RH18DA̲metabo.indb   4

2022/01/26   11:10:19

2022/01/26   11:10:19

Содержание RH18DA









































































Отзывы: