26
English
3. AC/DC
adapter
Problem
Possible Cause
Possible Solution
The adapter’s error lamp
is blinking red and the tool
does not operate when
switched on.
Output is suspended because the tool or
the AC/DC adapter is overheated.
Allow the tool and AC/DC adapter to
su
ffi
ciently cool down.
The adapter’s error lamp
rapidly blinks red and the
motor does not operate
when the tool is switched
on.
Output is suspended because the tool is
overloaded.
Remove the cause of the overload.
During protective operation,
the LED will blink di
ff
erently
for AC/DC adapter use and
battery use.
This is not a malfunction.
ACCESSORIES
WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. Never use replacement
parts or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure
whether it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.
STANDARD ACCESSORIES
EC36DA
(WC)
Intake
fi
lter (Code No. 377736) ......................................................................1
Battery (BSL36B18) .......................................................................................1
Battery Charger (UC18YSL3) .........................................................................1
Battery cover (Code No. 329897) ..................................................................1
EC36DA
(NN)
Intake
fi
lter (Code No. 377736) ......................................................................1
OPTIONAL ACCESSORIES.....sold separately
1. Battery
(BSL36B18)
2. Battery charger (UC18YSL3)
3. Battery cover (Code No. 329897)
4. AC/DC adapter (ET36A)
00Book̲EC36DA̲NA.indb 26
00Book̲EC36DA̲NA.indb 26
2021/07/08 9:36:18
2021/07/08 9:36:18
