5
MDTUG110817
ALARM SYSTEM
MANUAL ARMING
Press the button A of the remote control, the direction indicators will flash twice the LED be flashing and alarm will be
fully armed after 30secs.
If a BOOP sound is heard after arming this means the seat protection switch is not correctly closed.
ARMING WITHOUT ACTIVATING THE INTERNAL MOVEMENT SENSOR
Press the button A of the remote control for approximately 2 seconds, the direction indicators flash 3 times.
The LED remains on solid for the initial 30secs.
DISARMING
Press the button A of the remote control, the direction indicators flash once, the siren emits 1 BEEP sound and the
LED switches off if the alarm has not been triggered.
If the LED remains on and the siren also emits a BOOP sound this means that the alarm system was triggered. To find
out how the alarm was triggered consult the MEMORISED ALARMS table.
PANIC ALARM
It is possible to trigger a 10 second alarm cycle by pressing the B button on the remote control. This alarm cycle can
be interrupted by pressing the same button again.
‘OVERRIDE’ EMERGENCY CODE
If a remote control is lost, stolen or damaged, it is possible to disarm the alarm system with a 5 digit emergency code
called the ‘OVERRIDE’ code.
The code is found on the label supplied with the remote controls.
This label must be kept in a safe place and not with the motorcycle.
See table on next page.
