12
DEFCOM 3.1B
User Manual
It is possible to set some alarm functions to adapt the alarm system to the motorcycle and
its driver’s needs. All possible set-up are described in the table below where in bold are hi-
ghlighted the factory set-up.
12. MAIN PROGRAMMABLE FUNCTIONS
FUNCTION
OPTION “A”
OPTION “B”
Passive arming
Enabled
Disabled
Passive arming type
Only immobilizer
Immobilizer and
switches alarm
Immobilizer,
switches alarm
and tilt sensor
Horn alarm output
Continuous
Alternated
Buzzer Arm./Dis.
Enabled
Disabled
Direction indicators
Arm./Dis.
Enabled
Disabled
Alarm line
Yellow/Green wire
Active if removed the
earth connection
Active with
earth connection
Alarm line
Purple wire
Active if removed
the earth connection
Active with
earth connection
Arm./Dis. switch
input using CARD
Remote control
buttons
Button “A”:
Arming/Disarming
Button “A”: Arming
Button “B”: Disarming
Panic alarm
Enabled
Disabled
Override Code length
Only fi rst 3 digits
5 digits
Type of low
consumption mode
Stop Mode
Deep Sleep Mode
Activation timing of
low consumption
mode
5 days
10 days
Use only the
PRG007 PROGRAMMER V3
to select the various functions of the product. Sof-
tware updates for the
PRG007 PROGRAMMER V3
and information about the programmable
functions are available ONLINE in the
TECH AREA/VEHICLES AREA
of the www.metasystem.it
website.
To enable or disable the buzzer during the alarm Arming/Disarming execute the
following procedure:
• Enable
the
SERVICE MODE
and after press 6 time the
A BUTTON
of remote con-
trol, one Beep will confi rm the buzzer change.
• Then restore the normal operation of the alarm unit by deactivating the
SER-
VICE MODE
.
Содержание DEFCOM 3.1B
Страница 1: ...EN User Manual Manuel Utilisateur FR ...
Страница 16: ...23 Manuel Utilisateur DEFCOM 3 1B ...