Meta System ARCHIMOD 100, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 72

3-4
Operating and Maintenance Manual
Safety Provisions
code 504275001 Rev. September 2010
3.6 INDICATIONS OF DANGER IN THE WORK PLACE
The following signs must be placed in all points of access to the premises where the equipment
is installed.
Electric current
It indicates the presence of live parts.
Emergency interventions
Do not use water to extinguish a fire but only the extinguishers designed specifi-
cally for putting fires out on electronic equipment.
No smoking
This indication explains that it is forbidden to smoke in the area where the sign
is affixed.
3.6.1 Indications on board the equipment
The explanatory plates on the equipment can vary according to the country of destination and
to the relative applicable construction laws.
Strictly comply with what is required. It is strictly forbidden to remove these plates or to work
in a way different from what is indicated on them.
All the data on the plates must always be readable and cleaned periodically.
If a plate is ruined and/or is no longer legible, even only in part, ask for a new one from the
Manufacturer who is bound to supply a substitute.
WARNING
The plates must be neither removed nor covered; it is forbidden to affix others on the equip-
ment without the prior written authorisation from the Manufacturer.
3.7 RESIDUAL RISKS
‘Residual’ risks are risks that were impossible to eliminate at the design phase and, as such,
are potentially present on the equipment.
These risks are found with a specific analysis as prescribed by the standards of the sector.
The documentation relative to the analysis is included in the Technical File of the machine filed
by the Manufacturer.
In the case of the UPS ARCHIMOD
®
there are no residual risks provided that all the indications
and provisions in this manual are scrupulously complied with.