13
GB
IRL
AUS
USA
NZ
CDN
IND
Never spray on people, animals, electrical devices and lines, into the wind, or into
bodies of water.
Repairs and modifications to the tank are not permitted.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not leave the device in the sun. Make certain the device is not heated beyond
the maximum operating temperature
(
→
Table 1)
. Protect the device from frost and
ammonia.
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded
(
→
Table 1 below)
.
After use and before maintenance work, depressurize the spray line.
Scope of delivery
Backpack spraying device [1] with hose [2], spray wand [3], carrying strap [4], instructions
for use [5], shut-off valve [6] and seal set [7].
(Fig. 1)
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of these
instructions for use.
Technical data
Type of device
REKORD 3533
Max. filling amount
20 l (5.3 gal)
Max. spraying pressure
5 bar
Max. operating temperature
40 °C (104 °F)
Weight when empty
3.5 kg (7.7 lb)
Material of tank
Polypropylene
Where device is carried
Back
Technical residual quantity
0.13 l (4.4 oz)
Max. volume flow
2 l/min (0.53 gal/min) at 2 bar
Table 1
Assembly
1. Attach the carrying strap [4] to the tank. (
Fig. 2
)
2.
Push the tube [2] into the shut-off valve [6] and secure it with the cap nut.
3. Screw the spray wand [3] onto the shut-off valve [6].
(Fig. 3)
