Mesto INOX EXTREME 3615X, Инструкция по эксплуатации

Страница: 14 / 43

14
GB IRL AUS USA NZ CDN IND
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (
ĺ Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (
ĺ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (
ĺ Section "After Use", Section 1).
Scope of delivery
Tank [1] with pump [2], shut-off valve [3], hose [4], instructions for use [5], spray wand [6],
and for INOX EXTREME 3615XT a transport trolley consisting of parts set [7], holding tube
[8], attachment [9], wheels with caps [10] and axle [11] (Figs. 1a and 1b)
You will find the illustrations referred to in the text on pages 3 – 5 of these Instructions
for Use.
Technical data
Device family INOX EXTREME
Type 3615XT 3615X
Max. filling amount 10 l
Total contents 13 l
Max. spraying pressure 6 bar
Max. operating temperature 50 °C
Weight when empty 7,2 kg 6,0 kg
Material of tank Stainless steel with polyethylene inner tank
Where device is carried Transport trolley Manual
Back (with accessories 2121M)
Technical residual quantity 0.03 l
Max. volume flow 4,52 l/min
Recoil force < 5 N
Table 1
Assembly
1. Push the hose [4] onto the hose socket of the tank [12] and shut-off valve [3] and secure
it with the union nuts. (Fig. 2)