Operation
Main interface
1.
When the controller is turned on, it will show the initialization interface for 1 second, after this the main
interface will appear.
2.
If the main interface is not operated for 20 seconds, it will automatically rotate between showing the battery
voltage, the solar panel voltage and the temperature of the environment. Each parameter will show for 3
seconds, before switching to the next. Press and hold the SET button at the main interface for more than 5
seconds to speed up the automatic rotation, release the button to return to the normal speed.
3.
When in the main interface, press the SET button to turn the output on or off.
4.
Press the MENU button to switch to the next interface. The order of the interface is the following: Main
interface – Float voltage – Load reconnect voltage – Load disconnect voltage – Load mode – System voltage
select – Main interface.
ENGLISH
