MESTIC MCCA-42, Инструкция пользователя

Страница: 11 / 40

ENGLISH
The meaning of the error code on the screen and how to deal with it:
E1 Battery voltage is low
E2 Fan failure
E3 Compressor start up problems
E4 Compressor running speed fails to reach the requirements
E5 The model is overheating
E6 Module fault
E7 Thermal head fault (open circuit or short circuit)
Reinigen
• Before cleaning, remove the products from the device and remove the plug from the power supply. Only clean
with a slightly damp cloth, if necessary a non-aggressive cleaning agent can be used. After cleaning, always dry all
wet surfaces with a dry cloth.
• Never use sharp or abrasive products to clean the device.
• Defrost the cool box: frost can settle on the evaporator or inside of the cool box due to humidity, this can reduce
the cooling capacity. The cool box must be defrosted in time. As follows
• Take the products out of the cool box
• Switch off the device
• Open the lid
• Sweep up the melt water or drain the melt water through the plug.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This
means that this product must be handled pursuant to European Directive 2012/19/EU in order to be
recycled or dismantled to minimize its impact on the environment. For further information, please
contact your local or regional authorities. Electronic products not included in the selective sorting
process are potentially dangerous for the environment and human heath due to the presence of
hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MCCA 42 applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive
(2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this
manual
*148
*90
属于客户化物料
是
否
勾选符号
电路图铭牌
YD42
YD42.05-32
技术要求：
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级；
2.字体要求清晰，间距均匀；
3.制件材质为哑银龙，表面过膜，底色为哑光银色,LOGO颜色如图所示,字体及图形为黑色;
4.背面涂胶，胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试，剥离黏着力>10N/25mm。
5.高温、低温测试（贴于塑料件24H后再做测试）；
60℃（6H）→-10℃（6H）→60℃（6H）→-10℃（6H）,无起翘、无烧焦现象。
更改描述
A
发 布
Ⅲ
Made in China
C-Pentane
15.7 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
55W
4.6A/2.3A
R134a (50g)
Iterm number
MCCA-42
Volume 42 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
T 、 ST 、 SN 、 N
Product name Coolerbox
INK-024397
0.072t
CO equiv.
2
黄玉莲 2020.12.23
杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
1.15.042-0229
*148
*90
属于客户化物料
是
否
勾选符号
电路图铭牌
YD42
YD42.05-32
技术要求：
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级；
2.字体要求清晰，间距均匀；
3.制件材质为哑银龙，表面过膜，底色为哑光银色,LOGO颜色如图所示,字体及图形为黑色;
4.背面涂胶，胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试，剥离黏着力>10N/25mm。
5.高温、低温测试（贴于塑料件24H后再做测试）；
60℃（6H）→-10℃（6H）→60℃（6H）→-10℃（6H）,无起翘、无烧焦现象。
更改描述
A
发 布
Ⅲ
Made in China
C-Pentane
15.7 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
55W
4.6A/2.3A
R134a (50g)
Iterm number
MCCA-42
Volume 42 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
T 、 ST 、 SN 、 N
Product name Coolerbox
INK-024397
0.072t
CO equiv.
2
黄玉莲 2020.12.23
杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
1.15.042-0229