Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 69 / 214

69
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Pin assignment
Pin Description Note
1 TX+ Transmission Data+
2 TX- Transmission Data-
3 RX+ Receive Data+
4 RX- Receive Data-
Connection cable
Connection cables are available from different manufacturers
(e.g. PhönixContact, Lapp, Murr Elektronik). The connection cable
must be of cat 5e or better. Cables from Phönix Contact are
supporting the "SpeedConn"-locking for faster (un)plugging of the
cable.
The ethernet interface is electrically identical to realtime
interfaces like ProfiNet, EtherCat or Sercos. However, it
does neither support the extensions of these nor the
respective protocols.
Ethernet-Status / LEDs
The ethernet status is signalled via the LED "Ethernet Link".
5.3 2 digital inputs (integrated Master)
è This description is valid only for the digital inputs of the
integrated Master . The digital inputs of the Irinos-Box IR-
MASTER are almost identical: they provide a higher output
power.
è
Connector type: M12 5-pin female, A-coded
Each "integrated Master" provides two digital inputs with M12
standard pinning. It also has a 24V output, which is internally
connected via an 1 kOhm resistor to the
power supply of the
Irinos system. It is appropriate for the supply of buttons or
switches, which are connected to the digital inputs (e.g. foot pedals
or push buttons).
36
26
43
28