Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 28 / 214

28
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
System overview
The speed of Bit I/O is limited in two ways:
o
It depends on the speed of the measurement PC. Usually it is not
limited by the PC-hardware, but by the realtime capabilities of the
operating system.
o
It depends on the communication speed between the Irinos-Boxes
and between the Irinos-System and the PC.
Please note:
The digital in- and outputs of the Irinos-System are not
intended to replace a large PC and they have no realtime-
capabilities.
Although it is possible to control a measurement device of
even a small machine, this must be tested for each
application.
Two systems are available for digital in- and outputs:
a) The digital in- and outputs are directly integrated into the Irinos-
Boxes. This is for example the case with the Irinos-Boxes IR-
MASTER-KB1 or IR-DIO .
b) Separate I/O-Boxes are connected via the IO-Bus. Connection
of the IO-Bus is made via the Irinos-Box IR-MASTER .
Both systems can be combined.
3.6 Power supply
All Irinos-Boxes have a common 24 V power supply. This supply is
connected to the Irinos-System via the ILink interface. The supply is
forwarded to all other Irinos-Boxes via the ILink cabling.
Exceptions are:
- The Irinos-Boxes for digital in- and outputs ( IR-DIO -...-EXTP-
...): an external 24 V power supply is required for the in- and
outputs.
-
I/O-Boxes connected via the IO-Bus. Depending in their type,
some have an integrated power supply, some require a separate
43 54
59
43
54