Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 66 / 214

66
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Pin assignment
5 Pin assignment
5.1 ILink connector (Master, integrated Master & Slave)
è Connector type: DSUB 15-pin female
The ILink interface combines wires for the power supply and the
communication between the Irinos-Boxes in a single cable /
connector. For proper operation of the Irinos-System, it is
important to use high quality ILink cables with specific electrical
specifications. Therefore only
original cables of the type IR-ILINK
must be used.
By using an appropriate housing for the cable connectors, protection
class IP65 can be reached. Therefore the ILink cables are available
as a standard type and as a IP65 type.
Power to the Irinos-System is supplied via the ILink interface. All
other pins must remain unconnected, since this could lead to
reflections, which can interrupt the data transfer between the Irinos-
Boxes.
Power supply via ILink interface
Pin Description Note
1 IL_Data1 Data 1
2 IL_GND
Ground potential for data lines
(not connected to the power supply or the
internal supply of the Irinos-Box)
25
35
28