Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 42 / 214

42
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Product descriptions
LED
„Status“
Status
Flashing
slowly (< 1
Hz)
Everything ok
Flashing fast
(4 Hz)
Sine oscillator short circuit (only IR-TFV )
Always on Event active (e.g. error)
The status is related only to the Master-Box and not to the whole
Irinos-System.
It can be read out by the PC via the MscDll.
4.1.2
Status via 7-digit display (Master & Slave)
The current status of the Irinos-Box is displayed via the 7-digit
display.
Typically the 7-digit display shows the Box-number of the Irinos-
Box. It is
assigned at startup by the Master-Box . In case the
Box-number has only one character (which is most times the case),
the dot of the 7-digit display flashes:
As soon as an event occures, the character "F" followed by the
event number is displayed. E.g. F24 for overload of the incremental
encoder power supply of the Irinos-Box
IR-INC . This status can
also be read out by the PC via the MscDll.
After startup, the current IP network information of the Irinos
system is displayed once on the first available 7-digit display. If a
Master
IR-MASTER is used, it will be displayed on this box. If an
integrated Master is used, it will be displayed on the first Slave-Box.
46
172
110 26
172
52
112
43