Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 110 / 214

110
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Setup
7 Setup
7.1 First steps
The Irinos-System has been designed to get started quickly without
the need for configuration. Exceptions are:
o
Configuration of the network settings, if the Default settings
cannot be used.
o
Configuration of the incremental input type, if the pre-configured
type is not appropriate (can be done via the Irinos-Tool or the
MscDll).
After mounting and cabling, the Irinos-System can be switched on
immediately.
7.2 Box addressing
All Irinos-Boxes are automatically enumerated at startup. The
Master-Box always has the address 0. The addresses for the
Slave-Boxes are incremented according to the order in the ILink
cabling. The order of the measurement inputs and digital in- and
outputs depends on the order of the boxes.
The following figures provide some examples for Box addressing:
112
26
26