Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 158 / 214

158
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Measurement / Control via MscDll
o
The status of the measurement channels .
o
The status of the Irinos-Boxes .
Both categories can be read via the MscDll.
8.11.1
Status of measurement channels ("hardware status")
Manipulation of measurement values
If an error at a measurement channel is detected, which leads to an
unusable measurement value, the Irinos-System automatically
manipulates the measurement value: a default value is delivered
instead of a measurement value, as long as the error is active. This
functionality depends on the input type.
It is especially useful, if the measurement software has an integrated
probe supervision. A typical implementation of a probe supervision is
a check, whether the probe is moved at least the distance x
between two measurements.
The values are also manipulated, if the Master-Box is not receiving
measurement values from the Slave-Boxes because of a
communication problem. Typically the reason for this is a broken
ILink cabling (broken cable, connector not fixed properly, ...).
The manipulated value and the behaviour depend on the
measurement channel type:
158
161
105