Messoa NVR203-004P, Быстрый старт

Страница: 7 / 19

6
Rear Panel
The rear panel connectors for 4CH PoE NVR is:
The rear panel connectors for 8CH PoE NVR is:
1. Monitor 2: Connect a VGA monitor to the Monitor 2 output.
2. Alarm in: Connect 4 alarm inputs to the alarm connectors.
Alarm Out: N.C. or N.O type alarm signal out.
RS485 socket: For RS485 PTZ control.
3. Audio In: Connect the microphone or camera audio output to the audio input connector.
4. Audio Out: Connect a speaker or other audio output device to the audio output connector.
5. Monitor 1: Connect a HDMI monitor to the Monitor 1 output connector.
6. WAN: Connect NVR to Internet via a RJ-45 network cable.
7. LAN 1 ~ 8: Connect IP camera to the same LAN as the NVR with PoE (Power over Ethernet) ports.
8. DC 48V: Plug the DC 48V power source into DC 48V port. This power is used to power the IP
cameras.
9. DC 12V: Plug the DC 12V power source into DC 12V port. This power is used to power the main unit.