Messoa NVR203-004P, Быстрый старт

Страница: 5 / 19

4
First-time use - Full Auto Install Mode (Plug and Play)
When the first time connect IP cameras to the NVR, the NVR will pop up install wizard window. NVR
provides plug and play feature if user install specific IP cameras in Full Auto Install mode. User just
needs to click Full Auto Install and then the NVR will automatically configure IP address of a camera
connected by LAN. The NVR will then detect the IP camera and display image soon.
The connection of the LAN port is for IP cameras. The connection of the WAN port is for the NVR to
Internet.
Please click “Full Auto Install” and the NVR will automatically configure IP cameras connected by LAN.
After few seconds, the NVR will detect the IP cameras and display image.
Note
The connected IP cameras must be integrated for NVR to perform plug and play
feature. User also can go to Configuration
→
System
→
Device
→
Install Wizard, to bring
up the Install Wizard.
If the NVR does not configure the IP camera automatically, please recheck the conditions as listed above
and rerun the Install Wizard when it
’s ready.