Messoa NVR203-004, Руководство пользователя

Страница: 47 / 119

46
8.1.1.5 PTZ settings
In the Camera-Settings-PTZ sub menu, it allows user to configure the settings if the NVR is connected to a RS485 PTZ camera
or Network PTZ camera.
● Enabled
Select On to enable PTZ control.
● PTZ Type
It will display RS485 PTZ or Network PTZ. It depends on which PTZ type NVR connects.
● PTZ Protocol
Select the correct PTZ protocol type. NVR support Pelco P and Pelco D protocols.
● Baud Rate
Select the speed used to transmit instruction or information through the RS485 port on the NVR.
● Data Bit
The data bit used for transferring. This can be set to 8 or 7 through RS485 connection.
● Parity
This selects the transmission level of the connection through RS485 connection. Choose either None, Odd, or Even .
● Stop Bit
This field is to set the stop bit for the RS485 connection. This can be set to 1 or 2.
● Address
The address must set to the same address of RS485 PTZ camera.
Click
Apply
to save the settings.