Messoa NVR203-004, Руководство пользователя

Страница: 12 / 119

11
1. Audio In: Connect the microphone or camera audio input device to the audio input connector.
2. Audio Out: Connect a speaker or other audio output device to the audio output connector.
3. VGA: Connect a VGA monitor to the VGA output connector.
4. HDMI: Connect a HDMI monitor to the HDMI output connector.
5. LAN: Connect hub with IP cameras via RJ-45 network cable.
6. WAN: Connect NVR to Internet via a RJ-45 network cable.
7. RS485 socket: For RS485 PTZ control.
8. Alarm In: Connect to 4 or 8 alarm inputs to the alarm input connectors.
9. Alarm Out: N.C or N.O type alarm signal out.
10. Power: Plug the DC12V power source into the power socket.
1.4 Rear Panel
The rear panel connectors for NVR203-004/008 is:
1. Monitor 2: Connect a VGA monitor to the Monitor 2 output.
2. Alarm in/ Out: Connect 4 alarm inputs to the alarm connectors. Alarm Out: N.C. or N.O type alarm signal out.
RS485 socket: For RS485 PTZ control.
3. Audio In: Connect the microphone or camera audio output to the audio input connector.
4. Audio Out: Connect a speaker or other audio output device to the audio output connector.
5. Monitor 1: Connect a HDMI monitor to the Monitor 1 output connector.
6. WAN: Connect NVR to Internet via a RJ-45 network cable.
7. LAN 1 ~ 4: Connect IP camera to the same LAN as the NVR. Connect IP camera to PoE (Power over Ethernet) ports.
8. DC 48V: Plug the DC 48V source into DC 48V port to power the main unit.
9. DC 12V: Plug the DC 12V source into DC 12V port to power the IP cameras.
!"#$%
&'
!"#$%
()*
!"#$%
&'
!"#$%
()*
1 7 6 5
3
2 4
The rear panel connectors for NVR203-004P is:
8
9