Introduction
3
or pinched by items placed upon or against them, paying particular attention to
cords at plugs, screws and the point where they exit from the product.
12. Installation
This camera should be installed on a firm and solid part of the ceiling or wall. If
installed on a soft and weak place, the camera unit may fall. A person under it may
be injured and things under it may be damaged.
13. Lightning
For added protection for this camera during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the outlet and
disconnect the power supply and cable system. This will prevent damage to the
camera due to lightning and power-line surges. If lightning occurs, do not touch
the unit or any connected cables in order to avoid electric shock.
14. Overloading
Do not overload power supply and extension cords as this can result in a risk of fire
or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or
electrical shock. Never spill liquid of any kind on the camera.
16. Servicing
Do not attempt to service this camera yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
17. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualified
service personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the camera.
c. If the camera has been exposed to rain or water.
d. If the camera does not operate normally by following the operating instructions
in the instruction manual. Adjust only those controls that are covered by the
instruction manual as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f. When the camera exhibits a distinct change in performance-this indicates a
need for service.
18. Replacement Parts
