Messoa NCR875-HN5, Руководство пользователя

Страница: 7 / 36

3. Camera Installation
Use the appropriate brackets and equipment to mount this camera.
After installing the camera, your network camera should be accessed from your local network.
Configure network routers first.
Package Contents:
Camera *1 Rubber Pad *1
Insulation caps *3 Guide Pattern Sticker *1
Self-tapping screws *3 Plastic anchor *3
Cable adaptor * 1 Power connector * 1
Printed Quick Start Guide *1 Document CD *1
3.1 Installation
This section details how to set up the camera.
3.1.1 Drill the Mounting Location
1. Place the “guide pattern sticker” on the desired mounting location.
2. Drill the marked holes
3.1.2 Positioning the Camera
Listed below are different ways to adjust the camera position to capture the desired field of vision.
1. Loosen the screw (
a. ) to rotate either the camera or “pipe segment”. Select the desired position
then tighten the screw to set the position.
2. Loosen the screws on both sides (
b. ) to change the mounting bracket angle. Move the camera
into the desired position. Tighten the screws to set the position.
screw
(
a. )
pipe segment
screws ( b. )
mounting
bracket
6