IR Bullet Series | Quick Guide
8
3. If you possess a safety wire (fall prevention wire, not supplied), connect the safety wire with one end to
the mounting surface and the other end to the safety-cord screw of the unit.
Figure 2 - 3: Mounting the Camera
Warning
Depending on the material of mounting surface, different screws and anchors than those
supplied may be required. To prevent the unit from falling off, ensure that it is mounted to a
firm place (ceiling slab or channel) using a safety wire strong enough to withstand the total
weight of the unit. (Pay also attention to the finishing at the end of the wire.)
Caution
Safety wire must be connected with one end to the surface and the other end to the
safety-cord screw of the unit. By cabling so, it is possible to prevent the unit from accidental
falling at any time.
Safety wire (fall prevention wire, not supplied)
Safety-cord screw of the unit
Safety wire (fall prevention wire, not supplied)
Safety-cord screw of the unit
A301RV
A101RZ / A301RZ / A501RZ
