IR Bullet Series | Quick Guide
9
2.2.3 Connecting the Wires
1. While mounting the unit, pass the intact pigtail cable through the mounting bracket and also pass it
through the hole of mounting surface or place it by the side hole of the mounting bracket as the following
figures shown depending on your different applications.
2. Connect the power cable to the power plugs by one of the following 2 options.
AC 24V: Connect 24V (
～
) cables to the 2-pin terminal for AC 24V
PoE (IEEE 802.3af Class 0): Connect the RJ-45 jack to a PoE compatible network device that
supplied power with networking capability through the Ethernet cable.
3. Insert audio cable and alarm cable to the unit if necessary, and connect the network cable to the RJ-45
terminal of a switch.
Figure 2 - 4: Connecting the Wires Type
Ⅰ
Figure 2 - 5: Connecting the Wires Type
Ⅱ
Note
Please carefully manage waterproof procedure prior to operating as the pigtail cable linked
with the unit is not fully waterproof for different applications.
