Messina P5721 Скачать руководство пользователя

Страница: 2 / 47

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety should always be

followed, including the following:

(110-120V area) or 15 watts (220-240V area).

16.The sound pressure level under normal operating conditions is

75dB(A).

17.Please turn off the machine or unplug when the machine is not

operating properly.

18.Never place anything on the foot controller.

19.If the supply cord that fixed with foot controller is damaged, it

must be replaced by the manufacturer or its service agent or a

similar qualified person in order to avoid a hazard.

20.This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

21.Children should be supervised to ensure that they do not play

with the appliance.

Read all instructions before using this sewing machine.

1. An appliance should never be left unattended when plugged in.

2. Always unplug this appliance from the electric outlet immediately

after using and before cleaning.

3. Always unplug before re-lamping. Replace bulb with same type

rated 10 watts

1. Do not allow to be used as a toy. Close attention is necessary

when this appliance is used by or near children.

2. Use this appliance only for its intended use as described in this

manual. Use only attachments recommended by the

manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or plug, if it

is not working properly, if it has been dropped or damaged, or

dropped into water. Return the appliance to the nearest authorized

dealer or service center for examination, repair, electrical or

mechanical adjustment.

4. Never operate the appliance with any air openings block. Keep

ventilation openings of the sewing machine and foot controller

free from accumulation of lint, dust, and loose cloth.

5. Keep fingers away from all moving parts. Special care is required

around the sewing machine needle.

6. Always use the proper needle plate. The wrong plate can cause

the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may deflect the

needle causing it to break.

9. Switch the sewing machine off ("O") when making any adjustments

in the needle area, such as threading needle, changing needle,

threading bobbin, or changing presser foot, and the like.

10.Always unplug sewing machine from the electrical outlet when

removing covers, lubricating, or when making any other user

servicing adjustments mentioned in the instruction manual.

11.Never drop or insert any object into any opening.

12.Do not use outdoors.

13.Do not operate where aerosol spray products are being used or

where oxygen is being administered.

14.To disconnect, turn all controls to the off ("O") position, then

remove plug from outlet.

15.Do not unplug by pulling on cord. To unplug, grasp the plug, not

the cord.

DANGER

SAVE THESE INSTRUCTIONS

- To reduce the risk of electric shock:

WARNING

- To reduce the risk of burns, fire, electric

shock, or injury to persons:

This sewing machine is intended for household use only.

Содержание P5721
















































Результаты поиска

Содержание P5721

Отзывы:

Похожие инструкции для P5721

Бренды по названию

Популярные бренды

Messina P5721, Инструкция по эксплуатации

Результаты поиска

Содержание P5721

Отзывы:

Похожие инструкции для P5721

Бренды по названию

Популярные бренды