30
Maintenance
Attention:
Remove the needle plate:
Cleaning the feed dog:
Cleaning and lubricating the hook:
Important:
Disconnect the machine from the electricity supply by
removing the plug from the mains socket. When cleaning
the machine, it must always be disconnected from the
electricity supply.
Turn the handwheel until the needle is fully raised. Open the
hinged front cover and unscrew the needle plate screw withe
the screw driver. (1)
Remove the bobbin case and use the brush supplied to clean
the whole area. (2)
Remove the bobbin case. Snap the two hook retaining arms (a)
outwards. Remove the hook race cover (b) and the hook (c) and
clean withe a soft cloth. Lubricate at the points (d) (1-2 drops)
with sewing machine oil. Turn the handwheel until the hook race
(e) is in the left position. Replace the hook (c). Replace the
hook race cover and snap back the two hook retaining arms.
Insert he bobbin case and bobbin and replace the stitch plate.
Fabric fluff and threads must be removed regularly. Your
machine should be serviced at regular intervals at one of our
service agencies.
1
1
2
b
c
d
e
a
