Messina L9 Скачать руководство пользователя страница 9

Страница: 9 / 47

Connect the machine to a power source as illustrated. (1)

For appliance is equipped with a polarized plug which must be

used with the appropriate polarized outlet. (2)

Unplug power cord when machine is not in use.

Foot control regulates the sewing speed. (3)

Press main switch (A) for power and light on. (" l ")

Attention:

Foot control

Sewing light

Attention:

IMPORTANT NOTICE

Consult a qualified electrician if in doubt as to connect

machine to power source.

Unplug power cord when machine is not in use.

The foot control must be used with the appliance by 4C-316B

(110-120V area)/ 4C-326G (230V area)/ 4C-316C, 4C-326C

(220-240V area) manufactured by Panasonic Co., Ltd.(TW)

or KD-1902 (110-120V area)/ KD-2902 (220-240V area)

manufactured by ZHEJIANG FOUNDER MOTOR

CORPORATION Ltd.

For appliance with a polarized plug (one blade is wider than

the other).

To reduce the risk of electric shock, this plug is intended to fit

in a polarized outlet only one way. If it does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a

qualified electrician to install the proper outlet. Do not modify

the plug in any way. (2)

Connecting machine to power source

Polarized attachment plug

Conductor intended

to be grounded

Содержание L9
















































Результаты поиска

Содержание L9

Отзывы:

Похожие инструкции для L9

Бренды по названию

Популярные бренды

Messina L9, Инструкция по эксплуатации

Результаты поиска

Содержание L9

Отзывы:

Похожие инструкции для L9

Бренды по названию

Популярные бренды