Messina L9 Скачать руководство пользователя страница 21

Страница: 21 / 47

Matching needle/ fabric/ thread

NEEDLE, FABRIC, THREAD SELECTION GUIDE

NEEDLE SIZE

FABRICS

THREAD

9-11(65-75)

12(80)

Lightweight fabrics-thin cottons, voile, serge, silk, muslin, Qiana, interlocks,

cotton knits, tricot, jerseys, crepes, woven polyester, shirt & blouse fabrics.

Medium weight fabrics-cotton, satin, kettleclote, sailcloth, double knits,

lightweight woollens.

Medium weight fabrics-cotton duck, woolen, heavier knits, terrycloth, denims.

Heavyweight fabrics-canvas, woolens, outdoor tent and quilted fabrics,

denims, upholstery material (light to medium).

Heavy woollens, overcoat fabrics, upholstery fabrics, some leathers and

vinyls.

Standard sharp needles. Sizes range thin to large.

9 (65) to 18(110)

Semi-ball point needle, scarfed. 9(65) to 18(110)

Full ball point needle 9(65) to 18(110)

Leather needles. 12(80) to 18(110)

IMPORTANT: Match needle size to thread size and weight of fabric

NEEDLE, FABRIC SELECTION

Note:

1. Twin needles, can be purchased for utility and decorative work.

2. When sewing with twin needles, the stitch width dial should be set at less than "3".

3. European needles show sizes 65, 70, 80 etc. American and Japanese needles show size 9, 11, 12 etc.

4. Replace needle often (approximately every other garment ) and / or at first thread breakage or skipped stitches.

Natural woven fabrics-wool, cotton, silk, etc. Qiana.

Not recommended for double knits.

Natural and synthetic woven fabrics, polyester blends.

Knits-polyesters, interlocks, tricot, single and double knits.

Can be used instead of 151 for sewing all fabrics.

14(90)

16(100)

18(110)

Light-duty thread in cotton, nylon or

polyester.

Most threads sold are medium size and

suitable for these fabrics and needle

sizes. Use polyester threads on synthetic

materials and cotton on natural woven

fabrics for best results. Always use the

same thread on top and bottom.

Heavy duty thread, carpet thread.

(Use heavy foot pressure-large numbers.)

NEEDLES

EXPLANATION

TYPE OF FABRIC

Sweater knits, Lycra, swimsuit fabric, elastic.
Leather, vinyl, upholstery.

(Leaves smaller hole than standard large needle.)

HA 1

151

151/705H(SUK)

130 PCL

Содержание L9
















































Результаты поиска

Содержание L9

Отзывы:

Похожие инструкции для L9

Бренды по названию

Популярные бренды

Messina L9, Инструкция по эксплуатации

Результаты поиска

Содержание L9

Отзывы:

Похожие инструкции для L9

Бренды по названию

Популярные бренды