Chapter 2 POWERING ON & TIME SETTING
1.
Connect the adapter line to DC jack (18), then plug into a 100~240V
AC wall power outlet.
2.
The electronic clock will turn on and the clock figures “12:00” will
flash on the display to indicate that it is not set correctly.
3.
Press and hold the button TIME SET/PROGRAM(1) to maintain
“12:00” flash on the display, and then Press the HOUR/TU- button (2) to
set the hour. Press the MIN/TU+ button (3) to set the minute.
Note: Press and hold HOUR/TU- button (2) or MIN/TU+ button (3) to
scroll through the numbers quicker.
4. After setting to the correct time, either press TIME SET/PRO button
(1) once, or just leave it for 5 seconds. When the display stops flashing,
the clock will start running from the set time.
- 03 -
- 04 -
AM/FM
1
2
3
AM/FM
Press or wait 5 seconds to confirm time setting
Press and hold this button
Press to set hour and minute
5. In RADIO mode. To change the current time, the Radio must be
switched off. Press and hold for RADIO button (8) at least 2 seconds to
return to CLOCK mode. then follow the steps 3 & 4 above to set the new
time.
6.
In CLOCK mode. To see the seconds, press TIME SET/PRO button
(1) once. After 5 seconds, the display will change back into the current
HH:MM time.
AM/FM
Press and hold to return to CLOCK mode
AM/FM
Press this button
AM/FM
1
AM/FM
1
Display flash
