Chapter 15 SPECIFICATIONS&CAUTION
The lightning flash
and arrowhead
within the triangle is
a warning sign
alerting you of
“dangerous voltage”
inside the product.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE
COVER(ON BACK).NO
USER-SERVICEABLE PARTS
INSIDE,PEFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation
point within the
triangle is a warning
sign alerting you of
important
instructions
accornpanying the
product.
WARNING
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
: THE CLOCK RADIO MUST NOT BE USED IN ANY ENVIRONMENT
WHERE IT MAY BE SUBJECT TO THE DRIPPING OR SPLASHING OF WATER OR
OTHER LIQUIDS.
DO NOT CONNECT THE ANTENNA WIRE ON THE BACK OF THIS SET TO ANY
OUTDOOR ANTENNA.
The main plug is used as the disconnect device, the disconnect device shall remain
readily operable. It should not be obstructed during intended use. To disconnect the
apparatus from power, the mains plug of the apparatus must be disconnected from
the mains socket outlet completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
- 23 -
- 24 -
BACK OF SET
: Battery compartment for 3 volt (1.5V “AAA” size x 2pcs.) battery
(not included) for temporary time storage.
Electrical products should not be disposed of with household
waste. Thank you to recycle collection points provided for this
purpose. Consult with your local authorities or dealer for advice
on recycling.
Power Source : AC/DC Adapter-Auto Voltage 100V~240V, 50/60Hz
Radio Frequency: FM 87.5 ~ 108 MHZ
AM520 ~ 1710KHZ
Power Consumption: 7.5 W
Speaker: 8Ω 1W
USB Output: 5V 1.5A
DC battery : 3V
(1.5V “AAA” size x 2pcs. For clock memory. Not included)
Chapter 14 BATTERY BACK-UP
(
For Temporary Time Storage Only)
Connect a 3 volt (1.5V “AAA” size * 2pcs.) battery (not included) to the
terminals inside the battery compartment. In the event of a power
interruption, your set will not work normally from the mains supply but
there is now the advantage that your clock will continue to work. The
clock display will not light up, as the clock time will be held in the
memory. This also enables you to move the set from place to place
without re-setting the clock every time. The battery back-up system is
only meant to be used from short temporary power interruption. For
longer duration, the battery may become exhausted or there may be
some deviation in accuracy. When the battery is exhausted, it should
be removed from the set to prevent leakage. If you do not wish to take
advantage of the battery back-up system, your set will work normally
without a battery. However, if disconnected from the mains, the clock
figures will flash when the mains are re-connected and you must re-set
the clock as described in the Electronic Clock Operation paragraph.
