Mesis PressoMassaggio Eko PSM 1000, Руководство пользователя

Страница: 47 / 124

2. Connect the power cord. 3. Connect the single, double, or tri-
ple plug, to the unit.
IMPORTANT NOTE:
in the PressoMassaggio
®
, the connection
“machine-connector” is located on the side
of the machine. The connector connection
consists of 4 identical “pins” and 1 small
“guide pin” to which the appropriate holes
correspond on the machine connection. Pay
close attention to the direction in which the
connector connection is connected to the
machine as the “pins” and the “guide pin”
must be inserted into the corresponding
holes.
4. Put on the applicators that you wish
to use.
Leg cuffs
• Put on the leg cuffs and close them with
the zipper, place the leggings with the at-
tachments turned inwards.
• Inflation must start at the feet and gra -
dually reach the groin.
Abdominal/buttocks belt
• Put on abdominal belt on the buttocks-
hips-abdomen and fasten it with the Vel-
cro.
• The inflation must start from the top and
end in the lower part of the abdominal
belt.
Arm cuff
• Put on the arm cuff.
• Fasten the velcro “strap” on the shoulder
opposite the one with the arm cuff;
• The inflation must start from the hand
part and then go toward the shoulder in
sequence.
5. Press the power button to start the
unit.
IMPORTANT NOTE: In the PressoMassaggio
®
,
the power button is located on the front of
the machine.
IMPORTANT: for the instructions for use of
the unit, please refer to the relevant section.
Machine connection consisting
of: 4 large holes and
1 small that acts as a guide
Connector connec-
tion consisting of:
4 pins and
1 guide pin
47
User manual: PressoMassaggio
®
English