V1.0/08-2018 | ENG
ECGSYS
WARNINGS
Do not place the electrodes on wounds, as this may cause additional injury.
It must be ensured that neither the patient nor the electrodes (including the neutral electrode) come
into contact with other persons or conducting objects (even if these are earthed).
The MESI mTABLET ECG users must be adequately trained to use the device. Before the first use of
the device, users must carefully read the entire instructions for use and follow the instructions for use
of the connected equipment.
Do not use this unit in areas where there is any danger of explosion or the presence of flammable
gases such as anaesthetic agents.
Protect the device from moisture and liquids and extremely high/low temperatures. Also, protect the
device from mechanical stress and do not expose it to direct sunlight, as this can cause the device to
not function properly.
MESI mTABLET ECG module must not be used in an oxygen-rich environment.
The ECG measurement unit is not intended for use in conjunction with high frequency surgical
equipment.
Portable RF communications equipment including peripherals such as antenna cables and external
antennas should be used no closer than 30 cm (12 inches) to any part of the device including cables
specifed by the manufacturer. Otherwise degradation of the performance of this equipment could
result.
ECGSYS - 5/5
