background image

MEA                                            

 

PWR User’s Guide 

4  License and Warranty Information 

4.1 Important 

Information 

PLEASE READ CAREFULLY THE FOLLOWING BEFORE INSTALLING OR USING THIS HARDWARE, 
CONSISTING OF A CD ROM AND PCMCIA CARD, AND THE SOFTWARE (COLLECTIVELY, THE “PRODUCT”).  
IF YOU AGREE WITH ALL OF THE TERMS OF THIS LICENSE AGREEMENT & LIMITED WARRANTY, PROCEED 
WITH THE INSTALLATION AND USE OF THE PRODUCT FOLLOWING THE ONSCREEN INSTRUCTIONS.  IF 
YOU DO NOT AGREE, DO NOT INSTALL OR USE THE PRODUCT.  BY INSTALLING OR USING THE PRODUCT, 
YOU ARE AGREEING TO BE BOUND BY ALL OF THE TERMS OF THIS LICENSE AGREEMENT & LIMITED 
WARRANTY.  IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE AGREEMENT & LIMITED 
WARRANTY, PROMPTLY RETURN THE UNUSED PRODUCT AND DOCUMENTATION TO THE SOURCE (AS 
DEFINED BELOW) FOR A FULL REFUND OF THE PURCHASE PRICE. 

License Agreement & Limited Warranty 

LICENSE GRANT 

MeshNetworks, Inc. ("MeshNetworks"), by and through its resellers and suppliers (collectively, the “Source”) hereby 
licenses to the end-user (“You”) the software accompanying this Product ("Software").  You have right of possession 
to the CD ROM on which the Software is recorded (in accordance with your arrangement with the Source), but 
MeshNetworks retains title to the Software and related documentation.  The license is non-exclusive, non-
transferable, non-sublicensable and confers a right to use only the machine-readable, object code form of the 
Software for its normal and intended purpose by a single-user.  You may make one backup copy of the Software in 
machine-readable form, provided the backup copy is not installed or used on any electronic device.  You must 
reproduce on the backup copy the MeshNetworks’ copyright notice and any other proprietary legends that were on 
the original copy of the Software. 

RESTRICTIONS

 

You acknowledge that the Product contains copyrighted material, trade secrets and other proprietary material owned 
by MeshNetworks, and that unauthorized use of such material may cause serious loss or damage to MeshNetworks.  
You agree that You will not: 

• 

decompile, reverse engineer, disassemble, translate or reduce the Product to a human-perceivable form. 

• 

modify, adapt, pledge, lease, rent, share, lend, distribute, disclose or create derivative works based upon the 
Product in whole or in part. 

• 

electronically transmit the Software from one computer to another or over a network. 

• 

transfer any of your rights in the Software, the backup copy of the Software, the media, the documentation, 
or this License Agreement & Limited Warranty to another party.  

• 

use the Product for any unlawful or harmful purpose. 

TERM, TERMINATION

  

This license is effective until terminated.  You may terminate this license at any time by destroying the Software, 
related documentation and all copies thereof.  This license will terminate immediately without notice from 
MeshNetworks if You fail to comply with any provision of this License Agreement & Limited Warranty.  Upon 
termination You must destroy the Software, related documentation and all copies thereof. 

HARDWARE WARRANTY 

MeshNetworks warrants to You that the hardware elements of the Product will be substantially free from material 
defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of 
acquisition from the Source. 
Our sole obligation under this express warranty will be, at our option and expense, (1) to repair the defective 
hardware element or, (2) deliver to You an equivalent hardware element to replace the defective item.  Any hardware 
element that is replaced will become our property.  Replacement hardware elements may be new or reconditioned.  
We warrant any replaced or repaired hardware elements for the greater of ninety (90) days from shipment, or the 
remainder of the initial warranty period. 

SOFTWARE WARRANTY 

MeshNetworks warrants to You that the Software, except as noted below, will perform in substantial conformance to 
its published program specifications, for a period of ninety (90) days from the date of acquisition from the Source.  No 
updates are provided under this warranty.  Our sole obligation under this express warranty will be, at our option and 
expense, to replace any defective software product, with software which substantially conforms to applicable 
MeshNetworks’ published program specifications.  

27 

Содержание MEA PWR6300






































Отзывы: