MEA
PWR User’s Guide
Maximize chance of a direct line of sight connection to other devices.
The antenna supplied is designed to be mounted vertically.
2.3.3 Testing
Verify the operation of the PWR6300 using the following procedure:
1. Apply power to the PWR6300 – power reset button will be illuminated to red.
2. Obtain the transceiver MAC address and the ETH address that was recorded in Section
Error!
Reference source not found.
. The address will be in the format 00-05-12-0A-xx-yy for the
transceiver and 00-05-12-30-xx-yy for ETH.
3. From MeshManager, display devices using the MAC address.
4. Select the appropriate PWR (EWR template) in the device tree, and then ping the device (right
click and select ping).
A successful response to the ping command verifies that the PWR is communicating to the
infrastructure devices.
5
