Mesa Living 804.078, Инструкция по эксплуатации

Страница: 12 / 37

Name of parts:
Control panel
Attention: if the air conditioner is restarted immediately after shutdown in COOL mode, 3 min protection time
is necessary before automatic start.
Instructions of panel
POWER : You start or stop the airco by pressing this button
MODE: Use this button to select a mode – every time you press the button the device switches from COOL
(cooling) > DRY (dehumidification) > FAN (ventilate). The corresponding indicator lamp to the selected mode is
on.
UP and DOWN: Use these buttons to set the desired temperature and time. The display shows the set time.
SPEED
：
Pressing this button can select different speeds in cycle of LOW and HIGH; the corresponding indicator
lamp to the selected speed is on.
TIMER
：
Press this button to enter timer setting state and the indicator lamp is on.
Screen: The screen displays the set temperature in COOL mode; displays room temperature in FAN and DRY
modes; displays of
℃
shows current centigrade temperature and display of
℉
shows current Fahrenheit
temperature.
Meaning of codes:
When displayed as E2: problems with the sensor ambient temperature.
When displayed as E3: automatic defrosting of the humidifier is not working.
When displayed as DF: it means the cooling system is in anti-freezing state or defrosting state.
When displayed as FL: it means the air conditioner water tank is full.
SLEEP:
This indicator lamp is normally on when SLEEP state is started.
WATER FULL: This indicator lamp flickers with buzzer when the water tank is full.
1. Air outlet
2. Control panel
3. Air inlet
4. Exhaust pipe
5. Swivel Wheels
6. Handle
7. Filter
8. Drain pipe
9. Power line with plug
10. Buckle of powerline
11. Exhaust outlet