Mesa/Boogie TriAxis, Руководство пользователя, Страница: 8 / 46

PAGE 4
COPY
PRESET
PROGRAM/CHANNEL
PGM
/CH
EXIT
ENTR
CURRENT
MIDI NO.
PROGRAM/CHANNEL PRESET
COPY
4
FLASHES
EXIT
ENTR
PGM
/CH
IN
OFF
ON/LIFT
ON GROUND
MIDI
THRU OUT
FRONT PANEL:
(Continued)
PROGRAM / CHANNEL WINDOW: (Continued)
NOTE: From Power-up, the Midi Program number last used appears in the PRO-
GRAM / CHANNEL window. To view the current Midi Channel that
TriAxis
is set to receive Program Change commands on...
Press
the PGM / CH key below this window. The display changes to the current Midi Channel and the channel number flashes. Press the
PGM / CH key
to return to the current Midi Program number.
REMINDER...The Midi Channel will not be displayed unless you push the PGM / CH button.
TO CHANGE MIDI CHANNEL NUMBER:
Press the PGM / CH key. The PROGRAM display now indicates current Midi Channel
number by flashing.
Use the left & right arrowed keys to change the CHANNEL number. When the
desired channel is reached,
press the PGM / CH key to return the display to the
PROGRAM number.
MIDI SYSTEM EXCLUSIVE DATA DUMP FEATURE:
All of the information stored in memory, including PRESET/PROGRAM combina-
tions and LOOP/SWITCH settings, may be dumped to an external storage medium such as an “Alesis Data Disk”, personal computer
or any other system with a Midi port and hard or floppy disk storage capabilities. These settings (information) can then be retrieved
and loaded back into memory from the storage medium, providing backup and/or limitless expansion of the
TriAxis memory.
NOTE: The manufacture’s system exclusive identification code number for the TriAxis is 00004A. In case you ever need to list your
files on a personal computer, this would be a possible title. However, the majority of owners will probably never need this number.
TRANSMIT DATA DUMP RECEIVE: 1. Connect a 5-Pin DIN cable from the TriAxis Midi Out Jack. Follow instructions as to how to
set the storage medium’s Midi IN port to the receive ready state.
2. Press the SHIFT key and then the PRESET down key (ar-
rowed key facing to the left) on the
TriAxis. You will now see
the PRESET window display flash four times, indicating the
“Dump” has been completed.
NOTE:
You may possibly see the ID number appear on the screen of the
destination unit and then something like “Dump Completed.” The whole pro-
cedure takes about 500 milliseconds and all the information in the
TriAxis
memory is still intact. At this time you may write new presets knowing that
all of your previous presets are safely backed up.