Mesa/Boogie TriAxis, Руководство пользователя, Страница: 30 / 46

PAGE 26
Mindblowing! Just watching the display windows changing is worth all you coughed up for this baby, isn’t it? What did you say ?
you aren’t getting anything cool...Let us help.
First...Make sure you read this whole section carefully and thoroughly.
Second...Here is an example of what you can do with the control change software. We’ll take Factory Preset 04 and go from the
sparkling clean sound that is the Base Preset and modulate almost everything to produce a low wattage, cranked vintage
amp sound. Follow the 10-step procedure and assign the parameters as follows:
0
1 2 3 4 5 6 7 8 9
DYNAMIC VOICE PRESENCE MASTER LEAD 2 DRIVE LEAD 1 DRIVE BASS MIDDLE TREBLE GAIN PROGRAM / CHANNEL
PGM
/CH
04 10 7.5
10
1.0 0.0 0.0
1.0
2.0 0.0
After Full Modulation Pedal Down
The above clean sound (factory preset 04) after modulation
NOTE: If you did presets yet...upon your next power up you may lose your control change assignments.
Controller Assign
Assign contoller to 01 in these parameter windows
Value Assign
Assign these Values to the following parameters
GAIN
TREBLE
MIDDLE
BASS
LEAD 1 DRIVE
LEAD 2 DRIVE
MASTER
PRESENCE
DYNAMIC VOICE
01
01
01
01
01
01
0.0
0.0
0.0
08
05
11
105
0.0
0.0
106
109
0.0
VALUES
assigned to
parameters
CONTROLLERS
assigned to
parameters
0
1 2 3 4 5 6 7 8 9
DYNAMIC VOICE PRESENCE MASTER LEAD 2 DRIVE LEAD 1 DRIVE BASS MIDDLE TREBLE GAIN PROGRAM / CHANNEL
PGM
/CH
04 5.0 5.0
3.0
4.5 0.0 0.0
5.0
7.0 0.0
Control Change Demo
Before Modulation
Pedal Backed Off