Meru Networks AP1000 SERIES, Руководство по установке

Страница: 73 / 135

Installing the Access Points
© 2010 Meru Networks, Inc. Installing AP200
59
Figure 17: AP200 Connector Panel
Vertical Mounting
To vertically mount an AP:
1.
Using the bracket holes as a template, mark the location on the wall for the two
AP bracket mounting screws. They are placed 4 ½ inches apart, center-to-center,
one above the other. If you are not using plastic wall anchors, you must center
the mounting screws on a wall stud. If you do not center the mounting screws on
a wall stud, you must use plastic wall anchors.
Figure 18: AP200 Bracket
CONSOLE
ANT 1
ANT 2
3.3 VDC
ETHERNET
00108
100/1000
Ethernet
(Reserved)
Console
port
Antenna 1 Antenna 2 Power
inlet
Reset
(Push to restore
default settings)
(Currently
unsupported)
Access point mount
Ceiling mount hole
Ceiling mount hole
Access point mount
Access point mount
Locking detent
Wall cable access
Suspended ceiling
cable access
00100