EA
V56135-01 05/2017
Creating the door station as an intercom external unit
1
Navigate to the
(External units)
menu item.
2
Create a new external unit
(+)
.
3
Enter the name of the door station, the VoIP number and the password.
Linking the door station to the door station camera
1
»»Æʾ»¹ÅÄŰ½ËÈ·Ê¿ÅÄɹȻ»Äżʾ»»ÎÊ»ÈÄ·ÂËÄ¿ÊÅÆ»ÄƔ
2
Enter the name of the newly created camera in the search function (in this
example:
Door station
).
The camera is shown to you as the search result.
3
¿¹Á·ÄººÈ·½Ê¾»É»·È¹¾È»ÉËÂÊÊÅʾ»Â¿ÄÁ¿Ä½·È»·Å¼Ê¾»¹ÅÄŰ½ËÈ·Ê¿ÅÄɹȻ»Ä
for the external unit that is still open.
The door station and door station camera are now linked.
ÅÄŰ½ËȿĽʾ»ºÅÅÈÉÊ·Ê¿ÅķĺÉͿʹ¾¿Ä½º»Ì¿¹»
Using the
IP Setup software
ƑÏÅ˹·ÄÂŹ·Ê»·Äº¹ÅÄŰ½ËÈ»ºÅÅÈÉÊ·Ê¿ÅÄɷĺÉͿʹ¾¿Ä½º»Ì¿¹»É¿Äʾ»Ä»ÊÍÅÈÁƑ¼ÅÈ
»Î·ÃÆ»Ƒ·Äºº»ŰÄ»·ÂÂŹ·Ê¿ÅÄÉƺ¸»ÂÂÆËɾƖ¸ËÊÊÅÄ̐Ɩ̑º»Ì¿¹»ƻƔ¾»
IP Setup software
is located on the CD supplied with
the door station.
Install the software on your PC (following the instruc-
tions from the installation wizard) and start the software.
1
Create a new project.
2
Determine the location of the integrated IP devices
in the system.
3
Select the door station.
4
Click the
TK-Anbindung
tab.
5
Under
»½¿ÉÊÈ·È
, enter the IP address of the
U.motion KNX Server Plus and the SIP telephone
number of the door station.
6
Click
˼Ŏ¸»È»½¿ÉÊÈ·È·Ä»½»Ä
to create
an SIP entry (the device that you want to call).
7
Click the
Klingeltasten
tab.
8
Click
Add
to add the device that you want to call.
9
Select the SIP call connection for the bell push-
¸ËÊÊÅķĺ¹ÅÄŰÈÃͿʾ
Ok
.
|
The various functions such as timer, break/
make contact and changeover functions of the IP
ÉͿʹ¾¿Ä½º»Ì¿¹»ÃËÉÊ·ÂÉŸ»¹ÅÄŰ½ËÈ»ºƔźÅ
this, click the
Schaltgeräte
folder to access the
¹ÅÄŰ½ËÈ·Ê¿ÅÄƔ
|
For more information about this, refer to the manual on the USB stick.
4
Click
1 Users
to set options for the password.
5
Activate the
Enable anonymous viewer login (no
user name or password required)
option.
This activation is required for fault-free display in the
U.motion touch panel.
6
Save your settings
(Save)
You can exit the software application.
»ÉÊÅȿĽ¼·¹ÊÅÈÏÉ»ÊʿĽÉ
In the following steps, you reset all parameters (including the IP addresses) to the factory default settings.
1
Disconnect the network cable from the video encoder.
2
Press and hold the control button and reconnect the network cable.
3
Press and hold the control button until the status LED lights up yellow.
The video encoder has been reset when the status LED lights up green. The process may take about 1 minute.
|
For further setting options, please refer to the operating instructions of the video encoder.
ÅÄŰ½ËȿĽƔÃÅÊ¿ÅÄ»ÈÌ»ÈÂËÉ
In the U.motion Builder, you must:
•
¹ÅÄŰ½ËȻʾ»Ì¿º»Å»Ä¹Åº»È·É·ºÅÅÈÉÊ·Ê¿ÅĹ·Ã»È·¿Äʾ»Ì¿º»ÅÃÅÄ¿ÊÅȿĽ¼ËĹʿÅă
• create the door station as a new intercom external unit;
• link the door station to the camera.
ÅÄŰ½ËȿĽʾ»Ì¿º»Å»Ä¹Åº»È·É·ºÅÅÈÉÊ·Ê¿ÅĹ·Ã»È·¿Äʾ»Ì¿º»ÅÃÅÄ¿ÊÅȿĽ¼ËĹʿÅÄ
1
Open the
ƔÃÅÊ¿ÅÄ˿º»È
.
2
Navigate to the video monitoring menu item.
3
Create a new camera (
+
).
4
·Á»Ê¾»¼ÅÂÂÅͿĽɻÊʿĽÉÅÄʾ»¹ÅÄŰ½ËÈ·Ê¿ÅÄɹȻ»Äżʾ»¹·Ã»È·Ɠ
– Specify the name of your camera (e.g.
Door station
)
– Select
Generic (JPEG)
as the video format
– Specify the IP address of the video encoder, followed by the following path:
¾ÊÊÆƓƭƭ
xxx.xxx.x.xxx
ƭ·Î¿ÉƖ¹½¿ƭÀƽƭ¿Ã·½»Ɣ¹½¿
– IP port: 80
– Protocol: HTTP
– Maximum pictures per second: 5
– JPG
Technical data
Door station
Power supply:
PoE class 0
Elements:
Built-in loudspeaker, colour camera, 1 bell push-button (MEG6910-0033), 2 bell
push-button (MEG6910-0034)
Colour camera:
Mechanically adjustable
Total surveillance range:
150° horizontal/90° vertical
Bell push-buttons:
Back-lit with white LEDs
Nameplates:
Illuminated; can be changed from the front with no additional tools
Faceplate dimensions:
MEG6910-0033
355 x 154 x 2.5 mm (HxWxD)
MEG6910-0034:
355 x 154 x 2.5 mm (HxWxD)
Flush-mounted box dimensions:
MEG6910-0033:
331 x 130 x 52 mm (HxWxD)
MEG6910-0034
361 x 130 x 52 mm (HxWxD)
IP Switching device
Power supply:
AC 230 V
Output voltage for door opener:
AC 9 V/600 mA
Switch contacts:
2
Switching current:
10 A ohmic load, 6 A inductive/capacitive load
Input:
1, for potential-free contacts for controlling the IP switching device
Dimensions:
90 x 90 x 50 mm (HxWxD)
Device width:
5 modules
Video encoder
Power supply:
PoE class 2
Displays:
3 LEDs for power, status and network
Connections:
RJ45 (PoE class 2), BNC
Operating elements:
75 ohm termination, control button (reset)
Max. cable length
250 m coaxial video cable
Dimensions:
30 x 37 x 101 mm (HxWxD)
Weight:
82 g
¿ÉÆÅɻżʾ»º»Ì¿¹»É»Æ·È·Ê»ÂϼÈÅþÅËÉ»¾ÅºͷÉÊ»·Ê·ÄÅů¹¿·Â¹Å»¹Ê¿ÅÄÆÅ¿ÄÊƔÈż»ÉÉ¿ÅÄ·ÂÈ»¹Ï¹Â¿Ä½
ÆÈÅÊ»¹ÊÉÆ»ÅÆ»·ÄºÊ¾»»ÄÌ¿ÈÅÄûÄÊ·½·¿ÄÉÊÆÅÊ»ÄÊ¿·ÂÄ»½·Ê¿Ì»»Ů»¹ÊÉƔ
Schneider Electric GmbH c/o Merten
Gothaer Straße 29, 40880 Ratingen
www.merten.de
www.merten-austria.at
Kundenbetreuung:
Telephone: +49 2102-404 6000
